Quality Control

Quality Control

Goods Reciept

Laying Down

Dye

Can Drying

Finishing

Inspection

Goods Reciept

1 metre of each batch of base material is provided to our Quality Control team to assess:

Width

Weight

Yarn count

Visual appearance

Tear strength

This is assessed against spec or previous batches.

Laying Down

First bale is checked for width.

As material is laid down it is visually inspected for faults, stains and any other variations.

Width is checked at each new bale.

Material is checked to ensure face sides match.

Dye

Material is visually inspected for faults.

At end of scouring cycle material is assessed for presence of size and the materials wettability.

At end of specified dying cycle material is assessed for shade by comparing a cutting to a cutting from standard at same point in the process.

If shade is not acceptable adjustments would be made to improve to match standard

Once the dye house manager is satisfied with the shade and appearance he will authorise unloading of the jig.

Cuttings are stored for future reference.

Material is visually inspected as it passes through the machine with operator comments being recorded on the works order record sheet.

Can Drying

Cutting is taken from beginning and end of each batch, approximately 50 metres from each end, and is checked for shade and shade continuity, across and end to end.

Material is visually inspected as it passes through the machine with operator comments being recorded on the works order record sheet

Finishing

Approximately 100 metres into finishing, the run machine is stopped and a cutting is taken from material to be checked for

Weft straightness

Shade

Stiffness

Tear strength

Handle

Appearance

Shrinkage

If the operator is satisfied he will continue the run if not he will make the necessary adjustments and retest after 100 metres.

Inspection

Our trained operators will visually inspect material, tagging minor imperfections and cutting out major faults. Our quality tolerance is 10 minor faults per 100mts and no clusters.

William Clark and Sons

72 Upperlands Maghera

Co. Londonderry

BT46 5RZ

United Kingdom

T: +44 (0)28 7954 7204

E: sales@wmclark.co.uk